Table of Contents
Advertisement
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Mount spacing bushing 1 on
left side in wheel hub.
ATTENTION
Front wheel installation op-
posite the running direction.
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 1.
Remove front wheel stand and
firmly compress front forks. Do
not operate the brake lever at
the same time.
Mount front wheel stand
(
89).
Install screw 1 with specified
torque. Brace quick-release
axle on the right side at the
same time.
Screw in front wheel
quick-release axle
37 lb/ft (50 Nm)
Tighten axle clamping screws 2
to appropriate torque.
9
103
z
Advertisement
Table of Contents
