Table of Contents
Advertisement
Insert light source 1 while en-
suring correct alignment of lug
(arrow).
Close and lock spring strap 2.
Install cover 3.
Connect rubber cap with con-
nector 1 to light source 2.
Mounting bulb mask (
Replacing bulb for parking
light
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Turn connector 1 with light
source 2 counterclockwise and
pull out of headlight.
90).
Pull light source 1 out of
socket 2.
Replace defective light source.
Bulb for parking light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the glass
surface, always use a clean, dry
cloth to hold the light source.
9
111
z
Advertisement
Table of Contents
