Table of Contents
Advertisement
9
106
Remove axle nut 2 with
washer.
Loosen lock nuts 3 on left and
right.
z
Loosen adjusting screws 4 on
left and right.
Remove adjusting plate 5 and
slide axle as far as possible to
left.
Remove quick-release axle 6
and take off adjusting plate 7.
Roll rear wheel as far forward
as possible and remove
chain 8 from chain sprocket.
Roll rear wheel toward rear out
of swinging arm.
NOTICE
The chain sprocket and the
spacer sleeves on the left and
right are loosely inserted in the
wheel. Exercise care during the
removal, in order that the parts
are not damaged or are lost.
Installing rear wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS.
Please see the information on
the effect of wheel sizes on the
ABS system at the beginning
of this chapter.
Advertisement
Table of Contents
