Table of Contents
Advertisement
Install screw 2.
Install circlip 1.
Installing center fairing panel
(
115).
Jump-starting
ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the vehi-
cle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle.
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
higher than 12 V.
Damage to the motorcycle's
electronics.
The battery of the donor ve-
hicle must have a voltage of
12 V.
Remove the seat (
Removing center fairing panel
(
115).
Do not disconnect the battery
from the onboard electrical sys-
tem when jump-starting the
engine.
First connect positive terminal
of the discharged battery to
positive terminal on the donor
battery with red jumper cable
9
117
48).
z
Advertisement
Table of Contents
