Table of Contents
Advertisement
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced by
a specialist service facility,
preferably an authorized
BMW Motorrad retailer.
Checking front brake fluid
level
WARNING
Insufficient brake fluid in the
brake-fluid reservoir.
Considerably reduced braking
performance caused by air in the
brake system.
Check brake fluid level
regularly.
Make sure ground is level and
firm and hold motorcycle verti-
cally.
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
Move handlebars into straight-
ahead position.
Check brake fluid level in front
brake-fluid reservoir 1.
NOTICE
The brake fluid level in the brake-
fluid reservoir drops due to brake
pad wear.
Front brake fluid level
(visual check)
Brake fluid, DOT4
The brake fluid level must not
fall below the MIN mark.
If brake fluid level falls below the
approved level:
Have defect corrected as soon
as possible by an authorized
workshop, preferably an autho-
rized BMW Motorrad retailer.
9
95
z
Advertisement
Table of Contents
