Table of Contents
Advertisement
9
114
Remove bulb 2 from
light housing by turning it
counterclockwise.
z
Replacing defective light
source.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To prevent dirt from being de-
posited on the glass surface,
always use a clean, dry cloth to
hold it.
Install the light source 2 in
the light housing by turning it
clockwise.
Insert inside end of lens into
light housing and close it.
Install screw 1.
Advertisement
Table of Contents
