9
112
Insert light source 1 into
socket 2.
z
Insert connector 1 in headlight
and lock by turning clockwise.
Replacing bulb for brake
and rear light
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screws 1.
Pull off lens toward rear.
Remove bulb 2 for brake and
rear light.
Replace defective bulb.
Bulb for taillight/brake
light
P21/5W / 12 V / 5 W / 21 W
To prevent contaminants from
being deposited on the glass
surface, always use a clean, dry
cloth to hold the bulb.