BMW F 800 R 2015 Rider's Manual page 103

located on the wheel rim in close
proximity to the RDC sensor.
Removing front wheel
Park motorcycle, ensuring that
support surface is firm and
level.
Detach wheel speed sensor
lead from retaining clips 1
and 2.
Remove screw 3 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Pressing together the brake
pads with the brake caliper
removed.
The brake caliper cannot be
mounted over the brake disc.
Do not operate the brake
lever with the brake caliper
removed.
Remove securing screws 4 of
left and right brake calipers.
Push brake pads 1 slightly
apart by turning the brake
caliper 2 back and forth against
the brake rotor 3.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
Carefully pull brake calipers
back and outward to remove
them from the brake rotors.
Raise front of motorcy-
cle, preferably using a
BMW Motorrad front wheel
stand, continuing until the
wheel rotates freely.
9
101
z