ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Mount brake caliper carrier 1
on guide 2.
Roll rear wheel into swing arm
while guiding brake rotor be-
tween brake pads.
Roll rear wheel as far forward
as possible and lay chain 8 on
chain sprocket.
Mount left-hand adjusting
plate 7 in swing arm and install
quick-release axle 6 in brake
caliper and rear wheel.
Make sure that axle fits in
cutout of adjusting plate.
9
107
z