Mount front wheel stand
9
(
89).
102
Loosen axle clamping
z
screws 1.
Remove screw 1.
Loosen axle clamping
screws 2.
Slightly press the quick-release
axle inward for a better grip on
the right side.
Pull quick-release axle 1 out
while supporting the front
wheel.
Place front wheel down and
roll it forward out of the front
suspension.
Remove spacer bushing 1 from
the wheel hub.
Installing front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS.
Please see the information on
the effect of wheel sizes on the
ABS system at the beginning
of this chapter.