Implementing FAX Attendant
administration information is covered in Chapter 4, Fax Response
Information.
General Fax System Parameter
Administration
When setting up FAX Attendant for the first time, you must first administer the
general fax system parameters. Once these parameters are set, you will most
likely not have to change them. To enter this information, perform the following
steps:
1. At the AUDIX Voice Power/FAX Attendant menu, move the cursor to Fax
System Parameter Administration and press
— The Fax System Parameters Administration menu appears.
HELP
Figure 3-4. Fax System Parameters Administration Menu
2. At the Fax System Parameters Administration menu, move the cursor to
General Fax Parameters Administration and press
— The General Fax Parameter Administration form appears.
3-6
Fax System Parameters Administration
>
Account Code List Administration
Account Code Parameter Administration
Fax Group List Administration
General Fax Parameters Administration
PREV-FRM
NEXT-FRM
CANCEL
FRM-MGMT
.
Enter
CHG-KEYS
CHG-KEYS
.
Enter