AT&T Merlin Legend 10BS System Manager's Manual page 131

System Operations
8. When prompted, press
Shutting Down and Rebooting the UNIX
System
There are specific steps you should follow to shut down the UNIX system and
avoid damaging the files. Shutting down the UNIX system without stopping the
voice system causes any calls in process to terminate rather than allowing them
to complete. You should stop the voice system before shutting down the UNIX
system. To protect the data stored on the hard disk, this procedure must always
be performed before turning off power to the system and before moving the
hardware.
1. At the Console Login: prompt, type is and press
— If a password has been administered, the system prompts you to
— If no password has been administered, the Status Screen appears,
2. At the Password: prompt, type your password and press
security reasons, your password does not appear on the screen as you
type it in.)
— The Status Screen appears.
3. At the Status Screen, type your name and press
— The system records your name in the Status Screen Access Log.
4. At the Integrated Solution III menu, move the cursor to User
Maintenance and press
— The User Maintenance menu appears.
5. At the User Maintenance Menu, move the cursor to System Shutdown
and press
— The Shutdown screen appears.
6. Press
— The system shuts down and then a reboot prompt appears.
7. Press
turn off the machine.
message will display telling you to examine the Most Recent Audit
report.
Enter
enter your password. In this case, proceed to step 2.
proceed to step 3.
NOTE:
For comprehensive instructions on how to interpret the status
screen items, see the Integrated Solution III System Manager's
Guide.
The Integrated Solution III (IS-III) Main Menu appears.
Enter
.
Enter
(CONT) to shut down the system.
F3
- - to reboot the system, or press the power button to
Ctrl Alt Del
to return to the System Control menu.
Enter
F3
.
.
. (For
Enter
(SAVE).
5-9