Changing The Refresh Rate; Changing The State Of Voice Channels - AT&T Merlin Legend 10BS System Manager's Manual

System Operations
Caller Input is the touch-tone digits input by the last or current caller
serviced on this channel.
Dialed Digits is the digits dialed on this channel by FAX Attendant to
service the last or current caller.

Changing the Refresh Rate

The refresh rate determines how frequently the the system monitor is
automatically updated.
By default, the System Monitor refreshes every five seconds. To change the
refresh rate, follow these steps:
1. Press
2. Press
— The Change Refresh Rate window opens.
3. Enter a new refresh rate from 1 to 30 seconds.
4. Press

Changing the State of Voice Channels

After recovering from errors, you may need to place voice channels back in
service. For testing, you may wish to place voice channels manually out of
service. To change the state of a voice channel, follow these steps:
1. At the Configuration Management menu, move the cursor to Voice
Equipment and press
— The Voice Equipment window appears.
2. Press the
3. Press the
— A window opens requesting the identification of the equipment
4. Press the
— A menu of choices is displayed.
5. Select either INSERV (in service) or MANOOS (manual out of service) from
the menu and press
— The selection is entered in the new state field.
6. Press
7. Press the
— A menu of choices is displayed.
8. Select Channel from the menu and press
(CHG-KEYS) to activate the alternate keys.
F8
(CHG-RATE).
F1
(SAVE) to activate the new refresh rate.
F3
Enter
(CHG-KEYS) function key.
F8
(CHGSTATE) function key.
F2
whose state is to be changed and the new state it is to assume.
(CHOICES) function key.
F2
.
Enter
to move to the Equipment field.
Enter
(CHOICES) function key.
F2
.
.
Enter
5-11