Change State Of Fax Equipment Form - AT&T Merlin Legend 10BS System Manager's Manual

System Operations
HELP
Figure 5-4. Change State of Fax Equipment Form
— In the New State field, enter either i for "INSERV" or m for "MANOOS"
and press
(CHOICES) when the cursor is in this field.
— In the Fax Equipment field, enter either ca for "Card" or ch for
"Channel" and press
(CHOICES) when the cursor is in this field.
F2
— In the Equipment Number field, enter the equipment number or range
and press
— In the Change Immediately? field, enter yes or no . You can make your
choices by pressing
elect to change the state immediately, the operation terminates any
operations currently underway on the equipment specified. You then have
the opportunity to confirm or cancel the operation. Fax jobs interrupted by
this operation will be rescheduled.
— When you have completed the form, press
changes into the system.
5-16
Change State of Fax Equipment
New State: _____________
Equipment: _____________________
Equipment Number: ______________________________
Change Immediately?: ____
CHOICES SAVE PREV-FRM
, or, you can make your choices by pressing
Enter
Enter
.
Enter
(CHOICES) when the cursor is in this field. If you
F2
NEXT-FRM CANCEL
, or, you can make your choices by pressing
(SAVE) to enter your
F3
CHG-KEYS
FRM-MGMT CHG-KEYS
F2