Initial Basic Settings; Voice Guide To Set Smart Call Blocker And Answering System - AT&T DLP72212 Quick Start Manual

Initial basic settings

After you install your telephone or power returns following a power outage, the
handset will prompt you to set the date and time. To skip setting the date and time,
OFF/CANCEL on the handset.
press
Voice guide to set Smart call blocker and
answering system
After you install your telephone for the first time, the telephone base will prompt if
you want to set Smart call blocker and answering system. Follow the voice guide to
set or skip the settings.
Voice guide to set Smart call blocker
The telephone base announces, "Hello! This voice guide will assist you with the basic
setup of Smart call blocker...".
With the voice guide, you can set your Smart call blocker:
To screen calls with telephone numbers that are not saved in your phonebook or
Ì
star name list.
- OR -
Do not screen calls, and allow all incoming calls to get through.
Ì
Listen to the instructions to set up your Smart call blocker.
Voice guide to set answering system
After the Smart call blocker setting is done or skipped, the telephone base will
then prompt if you want to set the number of rings and message alert tone of the
answering system. Listen to the instructions to set up your answering system.
Stop the voice guide
While the voice guide is playing, press X/DELETE on the telephone base.
f
Restart the voice guide
On the telephone base, press the keys in the following sequence.
f
->
/SKIP
/PLAY/STOP
We recommend you program your telephone system before use. The following are
a few examples of common features to set before using the telephone. Refer to the
Handset settings and Answering system settings in the Complete user's manual for
detailed instructions on setting all telephone features.
->
/SKIP /SKIP
.
-> ->
/REPEAT
13
->
/REPEAT /SKIP
->