Outcalling Administration Form - AT&T Merlin Legend 10BS System Manager's Manual

Implementing FAX Attendant
Updating Service Administrator Registration
To update Service Administrator information, use the preceding procedure. The
new information will replace the old information.
NOTE:
Be sure to update Form G from the AT&T AUDIX Voice Power
Attendant System
information.
Outcalling Administration
Parameters that control Outcalling must be set during initial implementation.
They are generally not changed. The information is collected on Form H from
the AT&T AUDIX Voice Power
Implementation document. To set the outcalling parameters, follow these steps:
1. Get your updated Form H from the AT&T AUDIX Voice Power
Attendant System
2. At the AUDIX Voice Power/FAX Attendant menu, move the cursor to
Outcalling Administration and press
— The Outcalling Administration form appears.
HELP CHOICES
Figure 3-25. Outcalling Administration Form
3-34
TM
Planning and Implementation document with the new
TM
/FAX Attendant System
TM
Planning and Implementation document.
Outcalling Administration
Is outcalling active?:
Start Time:
End Time:
Retry Interval:
Initial Delay:
Maximum Number of Attempts:
Maximum Simultaneous Ports:
Maximum Number of Digits:
SAVE PREV-FRM NEXT-FRM
TM
/FAX
TM
Planning and
TM
/FAX
.
Enter
___
___:___ ___
___:___ ___
___ min
___ min
___
___
___
CANCEL CHG-KEYS
FRM-MGMT CHG-KEYS