AT&T Merlin Legend 10BS System Manager's Manual page 67

Implementing FAX Attendant
3. Move the cursor to the Application field where AUDIX Voice Power is
listed and press the space bar to blank out the entry.
4. Press
5. Press
Deleting a Subscriber's Profile from the System
From time to time, you may need to remove a subscriber from AUDIX Voice
Power/FAX Attendant and the system completely. For example, if a subscriber
leaves the company, you should delete that individual's profile and AUDIX Voice
Power/FAX Attendant privileges promptly.
The following procedure will remove the subscriber and the subscriber's profile,
including the extension label, from the Extension Directory.
NOTE:
Be sure to mark the deletion on Forms DX, DA, and DF from the AT&T
AUDIX Voice Power
Implementation document.
1. From the IS-III Main Menu, move the cursor to Extension Directory
and press
2. Enter the extension number and press
3. With the cursor in any field, press
asking you to confirm your deletion. If you want to delete, enter Y (yes)
and press
4. Press
The Extension Directory screen appears.
Displaying the Subscriber Database
You can list the current subscriber database on your screen to assist in
administering the system. Whenever you add a subscriber, remove a subscriber,
or change subscriber information, you can display the new subscriber list to
verify the changes. To display the subscriber database, perform the following
steps:
NOTE:
This removes all the AUDIX Voice Power data and all the
subscriber's mail messages (voice and fax).
(SAVE). A window confirms that the changes have been made.
F3
to continue.
Enter
TM
/FAX Attendant System
. The Extension Directory Screen appears.
Enter
(SAVE).
F3
NOTE:
The subscriber and the subscriber's profile, including the extension
label and the subscriber's mail (voice and fax) are removed from the
Extension Directory.
to continue.
Enter
TM
Planning and
(DISPLAY).
F1
(DELETE). A display appears,
F2
3-31