Answering Calls; Changing During A Call; Call Volume; Mute - AT&T 924 User Manual

924 book_1ATT 8/8/00

Answering Calls

Each line has a different ringer tone to signal an incoming call. A red
Line-in-Use light will also flash to identify the ringing line.
You can answer and end calls using the handset, speakerphone, or headset.
Handset
Speakerphone
Headset
NOTE: When you are using a line and a call is received on another line, the
red Line-in-Use light for the ringing line will flash and the set will sound a
quiet, short ring for the ringing line.

Changing During a Call

To switch from handset to speakerphone while on a call, press K
•
and replace the handset. To switch from speakerphone to handset, lift
the handset.
To switch from handset to headset, press h and replace the
•
handset. To switch from headset to handset, lift the handset.
To switch from speakerphone to headset, press h. To switch
•
from headset to speakerphone, press K.

Call Volume

You can adjust the handset, speaker, or headset volume during your call.
Press VOLUME + to increase volume or VOLUME - to lower volume.
Volume adjustments for one calling method (handset, headset, or
speakerphone) do not affect volume for other methods.

Mute

Press M to prevent the other party from hearing you (you will still be
able to hear the other party). The MUTE light goes on. Press M again to
continue your conversation.
NOTE: This feature works with the handset, speakerphone, and headset.
Mute is cancelled if you switch from the handset to speakerphone or
headset, or vice versa.
11:24 AM Page 13
TELEPHONE OPERATION
Answer a Call
Press LINE button for ringing
line,then:
Lift handset.
Press K.
Press h.
End a Call
Replace handset.
Press K.
Press h.
13