Call Waiting - AT&T Merlin Legend 10BS User Manual

Features

Call Waiting

When all the ICOM or SA buttons on your phone are busy
and another call comes in, Call Waiting informs you of inside
calls (single beep) and outside calls (double beep).
To answer a waiting call, you can either hang up or put your
current call on hold. If you hang up, your phone will ring with
the waiting call. If you put the call on hold, press ICOM
Originate Only or SA Originate Only and dial the feature
code to pick up a waiting call. If you have more than one call
waiting, the calls are delivered to your phone in the order they
arrived. Callers hear a special Call Waiting ring instead of a
busy signal.
Call Waiting works only on ICOM and SA buttons, and only
when they are all in use. Call Waiting does not work if your
calls are being covered. You must program your phone to
accept Call Waiting.
To Turn Call Waiting On and Off
1. Slide the T/P switch to P.
2. Press any ICOM or SA button.
3. Dial:
4. Slide the T/P switch to the center position.
5-20 Call Waiting
11 to turn on
11 to turn off.