AT&T Merlin Legend 10BS User Manual page 107

Features
NOTE:
This feature does not require a programmed button.
Once you have dialed
covered. This remains in effect until you repeat this
procedure and dial
Coverage.
To Program a Coverage VMS Off
Button
1. Label the button to be programmed as
Coverage VMS Off.
2. Slide the T/P switch to P.
3. Press the button you labeled Coverage VMS Off.
4. Dial
5. Slide the T/P switch to the center position.
To Turn Coverage VMS On and Off
1. Press the programmed Coverage VMS Off button.
The green Iight next to the line button goes on. Only your
inside calls will go to voice mail.
2. Press the programmed Coverage VMS Off button
again.
The green light next to the button goes off. Both your inside
and outside calls will go to voice mail.
5-30
Coverage
48 only your outside calls are
48 to send all your calls to
46.