AT&T Merlin Legend 10BS User Manual page 36

Your Analog Multiline Telephone
MLC-5 Cordless Phone
On the MLC-5 cordless phone, there are five imprinted
buttons, as described below.
Press to put a call on hold. The red light next to the
Hold
line button with the call on hold flashes until the call
is resumed or the person hangs up. As a reminder,
the phone beeps once every 60 seconds. (The
interval may vary depending on how your system is
administered. ) More than one call at a time can be
put on hold.
Press to show the status of the handset button lights
Status
(except On/Off, Low Battery, and Message), which
turn off after 20 seconds to save power.
Press to send a call to another phone.
Transfer
Press to change the chanel to improve reception.
Channel
Press to activate the handset to make or answer a
On/Off
call. The light next to this button is lit when the
handset is on.
NOTE:
Depending on how your system is set up, Transfer and
Hold may not work exactly as described in this guide.
Ask your system manager if these features work
differently.
Dedicated Feature Buttons
1-21