Recall; Features (Continued) - AT&T Merlin Legend 10BS User Manual

Features

Recall

Depending on how your system is set up, you may be able to
use the Recall button to disconnect from one call and get a
new inside or outside dial tone without hanging up, or to use
certain system features, such as Transfer or Hold. You can
then make another call, use the appropriate feature, or, if you
have made a mistake in dialing, start over.
If you are able to use Recall on your system, you can use it
when you are on a call on an outside line button, or on an
inside or outside call on an SA or ICOM button. Recall works
only on certain kinds of outside lines. Ask your system
manager if Recall works for outside lines on your phone.
The only phone you have to program with a Recall button is
the MLC-5 cordless phone. The other analog multiiine
phones have an imprinted Recall button.
To Program a Recall Button on an
MLC-5 Cordless Phone
1. Label the button to be programmed as Recall.
2. Slide the T/P switch to P.
3. Press the button you labeled Recall.
4. Dial
5. Slide the T/P switch to the center position.
775.
5-69
Recall