Signaling And Notify - AT&T Merlin Legend 10BS User Manual

Features

Signaling and Notify

In addition to calling directly, there are two other ways to use
the phone to contact your co-worker. Use Signaling to beep
or use Notify to turn on a light on a co-worker's phone.
Signaling. To use Signaling, program a Signal button. You
can signal your co-worker without lifting your handset. Your
co-worker's phone beeps for as long as you press the button.
You can use Signaling even when you and/or your co-worker
are on the phone. The green light next to your Signal button
shows when your co-worker is on the phone or using Do Not
Disturb. (Do Not Disturb prevents Signaling.)
If you have already programmed an Auto Dial button for a
co-worker, do not program a Signal button for that extension.
(You can only have one or the other.) Instead, reprogram that
Auto Dial button as a Signal button. Then, when you need
to call, lift the handset or press Speakerphone and press the
Signal button to automatically dial the extension.
Notify. To use Notify, program a Notify Send button on your
phone and a Notify Receive button on your co-worker's
phone (both buttons must be programmed). When you press
the Notify Send button, the green light next to your co-
worker's Notify Receive button goes on.
Signaling and Notify
5-79