AT&T Merlin Legend 10BS User Manual page 174

Programming Special
Characters
When you program Auto Dial buttons or Personal Speed Dial
codes, you are storing a sequence of numbers to be dialed
automatically. Some dialing sequences need special
characters. For example, you would press Hold to insert a
pause (p) after the dial-out code in a dialing sequence so the
system is allowed to seize an outside line before dialing the
number. It can also be used to separate a phone number
from an extension number.
The following table describes special characters. Ask your
system manager which special characters are needed and
when to use them.
Programming Special Characters
A
A-1