Receiving Messages - AT&T Merlin Legend 10BS User Manual

Features
To Post a Message
1. Press the programmed Posted Message button.
The green light next to the button flashes.
2. Dial the code for the message you want to post, from
01 through 20.
The Iight next to the button becomes steady.
To Cancel a Posted Message
1. Press the programmed Posted Message button.
The green light next to the button flashes.
2. Dial 00.
The light next to the button goes off.

Receiving Messages

When the green Message light on your phone is on, you have
a message. How you get messages depends on whether or
not your phone has a display.
If you have a non-display phone and the Message light is on,
you have a message which was sent by the system operator.
Call the operator to get the message. Depending on how
your system is set up, you may also have a voice mail
message or a fax.
5-50
Messaging