AT&T Merlin Legend 10BS User Manual page 112

Features
When you turn on the Do Not Disturb feature, your phone
automatically posts the message Do Not Disturb. This
message appears on the display of an inside caller with a
display phone when he or she calls you. When you turn off
the feature, the message is canceled.
NOTE:
For the Do Not Disturb feature to post the
Do Not Disturb message, you must also program a
Posted Message button on your phone, as described
later in this section. (Also see Messaging.)
You can also post and cancel the
message with a Posted Message button. However, posting
or canceling the message does not turn the Do Not Disturb
feature on or off. The Do Not Disturb features controls the
message; the message does not control the feature.
To Program a Do Not Disturb Button
1. Label the button to be programmed as
Do Not Disturb.
2. Slide the T/P switch to P.
3. Press the button you labeled Do Not Disturb.
4. Dial
5. Slide the T/P switch to the center position.
47.
Do Not Disturb
Do Not Disturb
5-35