Options While On Calls; Volume Control; Call Waiting; Call Privacy - AT&T SynJ SB67108 User Manual

Handset operation

Options while on calls

Volume control

While on a call, press VOLUME
listening volume.
NOTES:
• Handset and speakerphone volume settings are independent.
• When the volume reaches the minimum or maximum setting, you
hear an error tone.

Call waiting

If you subscribe to call waiting service with your telephone service
provider, you hear a beep if someone calls while you
are already on a call.
• Press
PHONE
hold and take the new call.
• Press
PHONE
and forth between calls.
NOTES:
• If you miss a call waiting call, the caller ID of the missed call displays for 15
seconds after the first call.
• For more information on caller ID with call waiting, see page 48.

Call privacy

To ensure call privacy, this telephone allows only one set at a time
to use a line. You can also block all system handsets from joining a
phone conversation (see page 31 for instructions for joining calls).
To enable call privacy:
During the call, press
Privacy ON. The screen displays -PRIV. No extensions
can join the call. If another extension tries to access
the line you are using, their screen shows Privacy.
Call privacy is automatically canceled when you end
the call.
�FLASH to put your current call on
�FLASH at any time to switch back
�ENTER twice to select
MENU
to increase or decrease the
27
L1
>Privacy ON
Record call on
Back
L1
Line1 00:01:15
-PRIV