Park - AT&T Merlin Legend 10BS User Manual

Features

Park

If your co-worker doesn't answer when you transfer a call, use
Park to hold the call while you page him or her.
When you park a call on your phone, you are putting it on
hold so it can be answered from any phone in the system.
You then page your co-worker and announce the call. Your
co-worker can pick up the call from the nearest phone by
using Pickup and dialing your extension.
Unanswered parked calls ring back at your phone within 30
seconds to 5 minutes, depending on how your company's
system is programmed. Calls that come in on Coverage
buttons cannot be parked.
To Program a Park Button
1. Label the button to be programmed as Park.
2. Slide the T/P switch to P.
3. Press the button you labeled Park.
4. Dial
5. Slide the T/P switch to the center position.
Park
5-58
86.