AT&T Merlin Legend 10BS User Manual page 158

Features
To Program Notify Buttons
1. Label button to be programmed as Notify Send —
(name) or Notify Receive — (name).
2. Slide the T/P switch to P.
3. Press the button you labeled Notify Send — (name) or
Notify Receive - (name).
4. Dial:
5. Dial your co-worker's extension.
6. Slide the T/P switch to the center position.
NOTE:
Notify Send will not work unless your co-worker
programs a Notify Receive button for your extension.
To Use Notify
1. To turn on Notify lights, press the programmed Notify
Send — (name) button.
The lights go on next to Notify Send — (name) button on your phone
and Notify Receive — (name) button on your co-worker's phone.
2. To turn off Notify lights, press either the programmed
Notify Send — (name) or Notify Receive — (name)
button.
The lights go off on both phones.
757 for Notify Send
758 for Notify Receive.
Signaling and Notify 5-81