Signaling And Notify - AT&T MERLIN LEGEND MLX-10D User Manual

Features

Signaling and Notify

In addition to calling directly, there are two other ways to use
the phone to contact your co-worker. Use Signaling to beep or
use Notify to turn on a light on a co-worker's phone.
Signaling. To use Signaling, program a Signal button. You
can then signal your co-worker
Your co-worker's phone beeps
the button.
You can use Signaling even when you and/or your co-worker
are on the phone. The light next to your Signal button is green
when your co-worker is on the phone or using Do Not Disturb.
(Do Not Disturb prevents Signaling.)
If you have already programmed an Auto Dial button for a
co-worker, do not program a Signal button for that extension.
Instead, reprogram that Auto Dial button as a Signal button.
Then, when you need to call, lift the handset or press Speaker,
and press the Signal button to automatically dial the extension.
Notify. To use Notify, program a Notify Send button on your
phone and a Notify Receive button on your co-worker's phone,
or program a Notify Receive button on your phone and a
Notify Send button on your co-worker's phone (both buttons
must be programmed). When you press the Notify Send
button, the green light next to your co-worker's Notify
Receive button goes on.
5-68
Signaling and Notify
without lifting your handset.
for as long as you hold down