Automatic Callback - Lucent Technologies Definity Callmaster II Instructions Manual

To place a call using a
personal, group, system,
or enhanced list

Automatic Callback

Sends you a special 3-burst ring tone indicating that a previously busy or
unanswered extension is now available. Use to avoid constant redialing when you
wish to speak to someone who is frequently busy on the telephone or in and out of
the office.
Note: This feature can be used only for extensions, not outside numbers.
To automatically place
another call to an
extension that was busy
or did not answer
8
Hang up or press
programming
Note: In the back of this instruction booklet, there
is an Abbreviated Dialing list on which you can
record your Personal List entries. Photocopy this
AD list for additional entries.
Group, system, and enhanced lists can be obtained
from the system manager.
1
Dial the appropriate AD list code:
List 1 __________
List 2 __________
List 3 __________
2
Dial the desired list item (1, 2, 3....)
The call is dialed
Note: You can program a list code on one of your
AD buttons for quicker access to a list. To place a
call, simply press the AD button and then dial the
desired list entry.
1
If the extension you dialed is busy or no one answers,
press
Auto Callbk
The green light goes on steadily until callback is
completed or canceled
Note: If you send your calls to coverage after
activating Automatic Callback, your callback calls
will still ring at your extension and will not be
redirected to coverage.
2
Press
Release
You will get a 3-burst priority ring when the
extension you attempted to call becomes available
or to end
Drop Release
[dial tone]
33