Table of Contents
Advertisement
Answering Other Extensions - Call Pickup
Pickup - Alias:
- Call pickup.
- Take.
Answering a Callback
Alarms - Triple Ring, Music or Recorded Message
INDeX - DT1 Phone Guide
Your DT1 can store a pickup group number (see below). You can then
pick up calls ringing any phone in the group.
To pick up ringing phones:
1. Without lifting the handset, dial FEATURE 9 ANSWER RELEASE to
pickup the longest ringing call.
2. Lift the handset or continue handsfree.
Setting the Pickup Group
To set the DT1's pickup group:
1. Without lifting the handset, dial FEATURE .
2. Short-chirp: Dial 4 2 (pickup group).
3. Double-tone: Dial the DT1's 4-digit passcode (if you make a mistake
dial
to restart entry).
4. Deep double-ring: Passcode not recognised. Dial the passcode
again or dial FEATURE to stop.
5. Double-ring: The DT1 has a pickup number set. Either dial
cancel it or FEATURE to stop.
6. Single-ring: The DT1 has no pickup number set. Dial FEATURE to
stop or dial a new number and then #.
7. Deep double-ring: Number entered invalid. Dial FEATURE to stop
or dial a new number and then # again.
8. Short-chirp: Select a feature or dial FEATURE to finish.
You can arrange a callback from a busy or unanswered extension (see
page 12). When the callback takes place, your DT1 rings. When you
answer, you hear the other extension ringing. If you do not answer, the
callback cancels after a short time (see page 22).
To cancel the callback:
1. Dial FEATURE 2 at any time to cancel the callback.
The System Manager can set system alarms to call a group to which
your phone belongs. To receive a group alarm your phone does not
have to be in group. The alarm can consist of ringing, music or a
recorded message.
To answer an alarm:
1. Dial ANSWER RELEASE.
Answering Calls – Page 17
38GDE00001SAC - Issue 4 (January 1999)
to
Advertisement
Table of Contents
