Automatic Daylight/Standard Times (#126)-Release 3.0 Or Later - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Feature Reference
Automatic Daylight/Standard Times
(#126)—Release 3.0 or Later
Description
This feature automatically updates the system clock for annual Daylight Savings
Time and Standard Time changes.
Related Features
You can not use System Day (#102)
You can use System Time (#103) and System Date (#101) with this
feature to correct your system clock.
Considerations
System Day (#102) is not applicable for Release 3.0 and later. The day of the
week is automatically calculated from the date.
Valid Entries
1 = Active
2 = Not Active
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the status of Automatic Daylight/Standard Time:
1. Press
10 or 11.
2. To activate or deactivate Automatic Daylight/Standard Time for the system,
press
3. Select another procedure or exit programming mode.
5-20
e
and on system phones.)
f 0 0 s s # 1 2 6
D
until the appropriate value displays.
at extension