Display Features And Features Used With The Softkeys - Lucent Technologies Definity 8410 User Manual

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763 Issue 2
June 1997
Page 15

Display Features and Features Used with the Softkeys

Note: If you are using an 8410D voice terminal, you can also use up to 12 additional
features accessed with the softkeys and display control buttons. Your system manager
can tell you which softkey features are available to you.
Directory Searches for the extension of another user in your location by allowing you to
key in the user's name with the dial pad. Use as a handy quick reference source for
extension number information.
Note: While in the Directory Mode, the voice terminal dial pad is used for entering the
name of the person for whom you are searching and therefore cannot be used for dialing a
call. In order to call the displayed number, press (if available) or press
Call Display Exit
and then dial the number using the dial pad.
Exit Use to leave Display Mode (after using any display or softkey feature) and
Exit
return to Normal (call-handling) Mode. Once you are in Normal Mode, you can use the
display to identify current call appearance, calling/called party, and calling/called number.
Feature Status Indication Indicates the status of each feature accessed with the
softkeys. If the feature is active, an arrow ( ) appears above the feature abbreviation; if
the arrow does not appear above the feature, the feature is off.
Inspect Shows you call-related information for an incoming call when you are already
active on a call. Use to identify and screen new calls.
Message Retrieval Allows you to retrieve messages left for you when your Message
light is on. Will also let you retrieve messages for other voice terminals not equipped with
a display (if you are authorized as a systemwide message retriever by your system