Lucent Technologies Definity 8410 User Manual page 16

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763
Test button
Transfer button
Volume control button
When the voice terminal is initially powered up, the green
light next to Test
switch or System 75 is not (or not yet) operational. The light
changes to steady green when the voice terminal is able to
communicate with the DEFINITY switch or with System 75,
and then goes off after a short period of time. After the voice
terminal is powered up, you can press
lights and the display (if applicable) on your voice terminal.
For transferring a call to another voice terminal.
For adjusting the volume of the following:
The speakerphone or speaker when a call is in progress
using the 2-way speakerphone or 1-way speaker
The handset receiver level while a call is in progress
using the handset
The tone ringer when the speaker is off and either the
handset is inactive or the tone ringer is active
Note: When the speaker is active, the ringer volume is
automatically reduced to a low setting. The volume is
restored when the speaker is turned off.
Remember: The Volume control button on your voice
terminal does not control the volume level of adjunct
equipment.
flashes if the link with the DEFINITY
Test to test the
Issue 2
June 1997
Page 8