Lucent Technologies Definity 8410 User Manual page 38

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763
To reset the 8410D
speakerphone (when the
voice terminal is first
powered up)
1
Press the softkey below Begin to reset the
speakerphone
(Press the softkey below Cancel if you do not want to
reset the speakerphone at this time. However, note
that the red light next to
flutter.)
If you press the softkey below Begin, the display
shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
will continue to
Speaker
Issue 2
June 1997
Page 30