Timer - Lucent Technologies Definity 8410 User Manual

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763

Timer

You can access this feature with the softkeys only if your voice terminal has a display and
if the feature name, Timer, appears on the second line of one of the feature option
screens.
To see elapsed time
(hours, minutes, seconds)
1
Press Menu and then press the softkey below
Timer (which exits you from softkey mode)
or, if Timer is not available on your display,
press Timer
Elapsed time is shown
2
To stop the timer and clear the display, press
and then press the softkey below Timer again
or, if Timer is not available on your display,
press again
Timer
Elapsed time is displayed on the screen for about
three seconds and then disappears
Issue 2
June 1997
Page 90
Menu