Lucent Technologies Definity 8410 User Manual page 82

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763
Note: If you are uncertain whether your voice terminal is set for the Speaker
(listen-only) feature or the Speakerphone (listen and talk) feature, check with your system
manager.
Use the following procedures if your voice terminal is set for the Speakerphone (speak
and listen) feature.
If the Reset Spkr label appears under the
you can use the Reset Speakerphone feature. For directions on using the Reset
Speakerphone feature, see "Reset Speakerphone" in this section.
To place/answer a call
without lifting the
handset, or to use
speakerphone with
any feature
Speaker
1
Press
Speaker
Red light next to
2
Place or answer the call, or access the selected feature
3
Adjust speakerphone volume if necessary
To raise the volume, press the right half of the
Volume control button labeled
to lower the volume, press the left half of the
Volume control button labeled
button on your 8410 voice terminal,
Speaker goes on steadily
June 1997
Page 74
;
Issue 2