Lucent Technologies Definity 8410 User Manual page 40

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763
If you hear the intercept tone while programming, start over from the beginning.
If you have an 8410D, you may be able to use the following softkey features with
Abbreviated Dialing (Press
Program (labeled Prog) — You can program a telephone number, extension, or
feature access code on an AD button.
Pause (labeled Pause) — A 1.5-second pause can be placed in an AD number,
such as between an access code and the telephone number.
Mark (labeled Mark) — Numbers included after a Mark on an AD button are
dialed in Touch-Tone signal form.
Wait (labeled Wait) — Numbers included after a Wait on an AD button are
delayed 5 to 25 seconds until the voice terminal receives dial tone from the switch.
Suppress (labeled Spres) — Suppressed numbers are dialed but not shown on
the display (an "s" appears instead). Used for passwords or authorization codes.
and then the softkey below the feature abbreviation.)
Menu
Issue 2
June 1997
Page 32