Display Feature Procedures; Definity® Ecs Release 5 8410 Voice Terminal User's Guide 555-230-763 Issue; Call Information - Lucent Technologies Definity 8410 User Manual

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763 Issue 2
June 1997
Page 79

Display Feature Procedures

This section includes the procedures for seven display features you may use with the
8410 voice terminal equipped with a display. However, note that the display, along with the
softkeys and display control buttons, can also be used for accessing up to 12 softkey
features. For procedures on using the display and softkeys and a list of the features that
can be accessed with the softkeys, see "Using the Display, Softkeys, and Display Control
Buttons" earlier in this guide.

Call Information

You may have as many as 10 call appearance buttons. Beginning with the first button in
the upper left hand corner of your faceplate and going down, the display identifies the
buttons in the left column as a through e. The buttons in the right column are identified as
f through j. When the display shows a= it represents call information for the first call
appearance button. The next button down would be shown as b= , and so on,
continuing through j= if all 10 of the buttons are used for call appearances.
When you dial an extension, that number is shown then replaced by the called party's
name and extension.