Lucent Technologies Definity 8410 User Manual page 26

DEFINITY® ECS Release 5 8410 Voice Terminal User's Guide 555-230-763
Note: If you are using an 8410D voice terminal, you may also be able to use
up to 12 additional features accessed with the softkeys and display control
buttons. Check with your system manager to see which softkey features are
available on your voice terminal and then put a checkmark in the box beside
each of those features.
Any feature not appearing on a button or accessed with the display and
softkeys can be activated or canceled by dialing a 1-, 2-, or 3-digit feature
access code. Ask your system manager for the feature access codes for the
features you need, and then write the assigned code number in the provided
blanks in each feature procedure.
If you receive an intercept tone (high-pitched, alternating high and low tone)
while attempting to operate any feature, you have taken too much time to
complete a procedural step or have made a dialing error. Hang up, get dial tone,
and begin again at Step 1.
System 75 is available in more than one version. Some features, such as
Abbreviated Dialing, Call Forwarding All Calls, Last Number Dialed, and Priority
Calling operate slightly differently with Version 1, and possibly Version 2, than
they do with later versions. If you are using Version 1 or 2 of the System 75
software, you should check the section titled Troubleshooting later in this guide
before you use any of these four features.
Issue 2
June 1997
Page 18