Figure 9.14 Virtual Server Example 3 - Ftp Server - Asus iPBX30 User Manual

iPBX30 User Manual
1. Create an FTP virtual server.
a) Click the Firewall/NAT ->Virtual Server menu to open the
Virtual Server Configuration.
b) Enter the needed information.
c) Make sure that Bypass ACL box is unchecked.
d) Click Add to save the virtual server settings.
Figure 9.14. Virtual Server Example 3 – FTP Server
2. Create an ACL rule to control access to the FTP server.
a) Click Firewall ->ACL menu to open the ACL Rule configuration
page.
b) Select WAN ->LAN option from the Traffic Direction drop-down
list.
c) Select Add New from the ID drop-down list.
d) Select Allow from the Action drop-down list.
e) Select Subnet from the Source Type drop-down list.
f) Enter the 168.192.128.0 and 255.255.255.0 for the Source
Address and Mask fields respectively.
g) Select FTP from the Service Type drop-down list.
h) Assign a priority for this rule by selecting a number from the
Move to drop-down list. Note that the number indicates the
priority of the rule with 1 being the highest. Higher priority rules
Chapter 9
85