Table of Contents
Advertisement
iPBX30 User Manual
9.6.4 View Configured Self-Access Rules
To see existing Self-Access Rules, just open the Self-Access ACL
configuration page by clicking Firewall/NAT ->Self-Access ACL
menu.
9.7
Configure Virtual Server
Virtual server allows you to configure up to ten public servers (such
as a Web, E-mail, FTP server and etc.) accessible by external
users of the Internet. Each service is provided by a dedicated
server configured with a fixed IP Address. Although the internal
service addresses are not directly accessible to the external users
the router is able to identify the service requested by the service
port number and redirects the request to the appropriate internal
server.
Note: iPBX30 supports only one server of any
particular type at a time.
Figure 9.9. Virtual Server Configuration Page
9.7.1 Virtual Server Configuration Parameters
The table below describes the configuration parameters available
for virtual server configuration.
Chapter 9
79
Advertisement
Table of Contents
