View The Status Of Attached Usb Storage Devices; Configure Ftp Service - Asus iPBX30 User Manual

iPBX30 User Manual
10.2 View the Status of Attached USB Storage
Devices
To view the status of attached USB storage devices, follow the
instructions below:
1. Open the Network Storage page by clicking USB Application
-> Network Storage menu.
2. Click on Reload button to see the updated status of the
attached USB storage devices.
10.3 Configure FTP Service
To configure FTP service, follow the instructions below:
1. Click USB Application ->Network Storage menu to open the
Network Storage page.
2. Click on Configure button to configure FTP service.
3. Check the desired options. Please refer to Table 10.2 FTP Serv-
er Configuration for details.
4. (Optional) Enter the username and password and select an ac-
cess right from the drop-down list. This option is needed only
when certain users are allowed to access the attached USB
storage.
5. Click on the Apply button to save the settings.
To configure PBX Voicemail and CDR Storage on the same page,
follow the instructions below:
1. Select the storage device of IP-PBX voice mail message and
Call Detail Record (CDR). The default device is the on board
8Mbytes flash memory.
2. Click on the Apply button to save the settings.
Chapter 10
91