Table of Contents
Advertisement
Chapter 9
IP Address,
Subnet
Service
Select a service, from the drop-down list, to which this rule
should apply. If the desired service is not listed, click on the
Edit button to create a new service.
Time
Select a time slot during which this rule should apply.
Enable
Date and Time
Table 9.4. Service Configuration Parameters
Field
Service Name
Enter a distinctive name identifying the new service.
Protocol
Select a protocol type from the drop-down list. Available options are All,
TCP, UDP, ICMP, IGMP, AH ESP and TCP/UDP.
Port
This option allows you to specify the port number(s) used by the device.
Use the drop-down list to select one of the following options:
Any
Single
Port Number
Range
Start Port
End Port
72
Select any of these options and enter details as
described in the Source IP section above.
Check this box if you want to activate the ACL rule at the
time specified. Uncheck this box to make the rule active
at all times
Chck the desired dates and time for this ACL rule.
Description
Select this option if the service is used to designate an
arbitary application.
Select this option if the service uses a specific port
number.
Enter the port number
Select this option if the service uses a range of ports.
The following fields become available for entry when this
option is selected.
Enter the starting value of the port range
Enter the ending value of the port range
iPBX30 User Manual
Advertisement
Table of Contents
