System Management; Configure System Services; Figure 11.1 System Services Configuration Page - Asus iPBX30 User Manual

Chapter 11
11

System Management

This chapter describes the following administrative tasks that you
can perform using the web-based configuration software:
• Configure available system services
• Modify password and configure system settings
• View system information
• Modify system date and time
• Configure SNMP
• Reset system configuration to factory default settings
• Backup and restore system configuration
• Restart system
• Update firmware
11.1 Configure System Services
You can use the System Services configuration page to enable
or disable services supported by the iPBX30. All services, except
DDNS, SNTP, UPnP and RIP, are all enabled in the predefined
configuration. To disable or enable individual service, follow the
steps below:
1. Click Management ->System Services menu to open the
System Services configuration page.
2. Click on the corresponding Enable or Disable radio button to
enable or disable the desired service.
3. Click on Apply button to save the changes.
Figure 11.1. System Services Configuration Page
94
iPBX30 User Manual