Adding Static Routes; Figure 7.3 Static Route Configuration - Asus iPBX30 User Manual

Chapter 7
Field
Subnet Mask
Gateway
Interface

7.3.2 Adding Static Routes

Follow these instructions to add a static route to the routing table.
1. Click the Advanced ->Static Route menu to open the Static
Route configuration page.
2. Enter static routes information such as destination IP address,
destination subnet mask, gateway IP address and the interface
in the corresponding fields.
To create a route that defines the default gateway for your
LAN, enter 0.0.0.0 in both the Destination IP Address and
Subnet Mask fields.
3. Click Add to add a new route.
56
Description
Indicates which parts of the destination address refer to the
network and which parts refer to a computer on the network.
Refer to Appendix 11 for an explanation of network masks.
The default route uses a 0.0.0.0 for subnet mask.
Gateway IP address
Available option include AUTO, Eth0 (LAN), Eth1 (WAN),
PPPoE:0 (unnumbered), PPPoE:1 (1st PPPoE session),
PPPoE:2 (2nd PPPoE session). These options are
selectable from the drop-down list. If AUTO is selected, the
router will automatically assign an interface to route the
packets based on the gateway IP address.
Figure 7.3. Static Route Configuration
iPBX30 User Manual