Add An Acl Rule; Figure 9.4 Acl Configuration Page - Asus iPBX30 User Manual

Chapter 9

9.5.1 Add an ACL Rule

To add an ACL rule, follow the instructions below:
1. Click Firewall/NAT ->ACL menu to open the ACL Rule
configuration page.
2. Select an option from the Traffic Direction drop-down list. For
example, if you want to create an ACL to filter traffic originated from
LAN and destined to WAN, then choose LAN ->WAN option.
3. Select Add New from the "ID" drop-down list.
4. Set desired action (Allow or Deny) from the Action drop-down list.
5. Select from the Route To drop-down list if you intend to direct
the traffic to a specific interface. Choose AUTO if you want to
have the iPBX30 to route the traffic automatically.
6. Choose NAT type and enter the required information for the
selected NAT type.
74
Figure 9.4. ACL Configuration Page
iPBX30 User Manual