Table of Contents
Advertisement
iPBX30 User Manual
4 Using the Web UI Management
The iPBX30 includes the Web UI Management, a preinstalled
Web-based configuration software. It enables you to configure the
device settings to meet the needs of your network. You can access
it through your web browser from any PC connected to the iPBX30
via the LAN or the WAN ports.
This chapter describes the general guides in using the Web UI
Management.
4.1 Log into the Web UI Management
To access the software, you need the following:
• A computer connected to the LAN or WAN port on the iPBX30
as described in the chapter 3.
• A web browser installed on the computer. The program is
designed to work best with Microsoft Internet Explorer® 6.0 or
later.
You may access the software from any computer connected to
the iPBX30 via the LAN or WAN ports. However, the instructions
provided here are for computers connected via the LAN ports.
1. From a LAN computer, open your web browser, type the
following in the web address (or location) box, and press
<Enter>:
This is the predefined IP address for the LAN port on the iPBX30.
A login screen is shown.
http://192.168.1.1
chapter 4
23
Advertisement
Table of Contents
