Table of Contents
Advertisement
Chapter 9
5. Select the service, HTTP_8080, from the Redirect Service drop-
down list.
6. Click Add to save the virtual server settings.
9.7.3 Virtual Server Example 2 – FTP Server
This FTP server provides FTP service using standard FTP port.
Following describes the procedure to setup the FTP server.
1. Click the Firewall/NAT ->Virtual Server menu to open the
Virtual Server configuration page.
2. Enter the needed information.
3. Click Add to save the virtual server settings.
Figure 9.13. Virtual Server Example 2 – FTP Server
9.7.4 Virtual Server Example 3 – FTP Server with
Access Control
This example is similar to the previous example described in
section 9.7.3 but with access control dictated by the firewall ACL
rule. In this example, we want to limit the FTP server access to a
network, 168.192.128.0.
The following describes the procedure to setup such a FTP service.
84
iPBX30 User Manual
Advertisement
Table of Contents
